Close

Relief for ODA Team in Ukraine

Learn more
ODA Kernel SDK
API Reference > OdGe Classes > OdGeLineSeg3d Class
OdGeLineSeg3d Class
Syntax
C++
class OdGeLineSeg3d : public OdGeLinearEnt3d;

This class represents line segments in 3D space. 3D line segment can be defined with a start and end points or with a point and a non-zero vector that specifies segment length and direction. By default its start parameter equals to 0.0 and end parameter equals to 1.0. 

Corresponding C++ library: TD_Ge 

 

OdGeLineSeg3dOdGeLineSeg3dOdGeLineSeg3dOdGeLineSeg3d

File: GeLineSeg3d.h 

Module: API Reference 

Show:
No members matching the current filter
OdGeLineSeg3d()
This is the overview for the OdGeLineSeg3d constructor overload.
~OdGeEntity3d
Destructor for the OdGeEntity3d class. (Inherited from OdGeEntity3d)
Show:
No members matching the current filter
GE_OPERATORS_OVERRIDE_3D
(Inherited from OdGeCurve3d)
GE_OPERATORS_OVERRIDE_3D
GE_OPERATORS_OVERRIDE_3D
(Inherited from OdGeLinearEnt3d)
appendSamplePoints(const OdGeInterval *, double, OdGePoint3dArray&, OdGeDoubleArray*)
This is the overview for the appendSamplePoints method overload.
area
Determines the area of this curve between the specified parameters.
(Inherited from OdGeCurve3d)
baryComb
Returns the weighted average of the start point and end point of this line segment.
boundBlock()
This is the overview for the boundBlock method overload.
closestPointTo(const OdGeCurve3d&, OdGePoint3d&, const OdGeTol&)
This is the overview for the closestPointTo method overload.
convertTo2d
Returns a pointer to the 2D variant of the curve (z-coordinate will be ignored).
(Inherited from OdGeCurve3d)
copy
Returns a copy of this entity. (Inherited from OdGeEntity3d)
direction
Returns a unit vector parallel to this line, and pointing in the direction of increasing parametric value. (Inherited from OdGeLinearEnt3d)
distanceTo(const OdGeCurve3d&, const OdGeTol&)
This is the overview for the distanceTo method overload.
endPoint
Returns the end point of this line segment.
evalPoint(double)
This is the overview for the evalPoint method overload.
explode
Explodes this curve over the specified interval.
(Inherited from OdGeCurve3d)
getBisector
Gets the unbounded perpendicular bisecting plane of this line segment.
getClosestPointTo(const OdGeCurve3d&, OdGePointOnCurve3d&, OdGePointOnCurve3d&, const OdGeTol&)
This is the overview for the getClosestPointTo method overload.
getDistanceToVector
Deprecated! Use distanceTo instead.
Returns the distance to a vector.
getGeomExtents
Returns the bounding box of the whole curve or a part of it. The box is axis-aligned in the specified local coordinate system. It is guaranteed to enclose the curve, but not guaranteed to be tight/minimal.
(Inherited from OdGeCurve3d)
getInterval(OdGeInterval&)
This is the overview for the getInterval method overload.
getLine
Returns a reference to an infinite line collinear with this one.
(Inherited from OdGeLinearEnt3d)
getLocalClosestPoints(const OdGeCurve3d&, OdGePointOnCurve3d&, OdGePointOnCurve3d&, const OdGeInterval*, const OdGeInterval*, const OdGeTol&)
This is the overview for the getLocalClosestPoints method overload.
getNormalPoint
Returns true, and the point on this curve whose normal vector passes through the specified point, if and only if a normal point was found.
(Inherited from OdGeCurve3d)
getPerpPlane
Returns a plane, containing the specified point, perpendicular to this line.
(Inherited from OdGeLinearEnt3d)
getProjClosestPointTo(const OdGeCurve3d&, const OdGeVector3d&, OdGePointOnCurve3d&, OdGePointOnCurve3d&, const OdGeTol&)
This is the overview for the getProjClosestPointTo method overload.
getSamplePoints(const OdGeInterval*, double, OdGePoint3dArray&, OdGeDoubleArray*)
This is the overview for the getSamplePoints method overload.
getSplitCurves
Returns pointers to the two curves that result from splitting this curve at the point corresponding to param.
(Inherited from OdGeCurve3d)
getTrimmedOffset
Retrieves one or more trimmed offset curves.
(Inherited from OdGeCurve3d)
hasEndPoint
Returns true, and the end point, if and only if the parametric interval of this curve has an upper bound.
(Inherited from OdGeCurve3d)
hasMidPoint
Checks the boundaries of the curve interval and calculates a point from the curve interval that corresponds to the specified coefficient.
(Inherited from OdGeCurve3d)
hasStartPoint
Returns true, and the start point, if and only if the parametric interval of this curve has a lower bound.
(Inherited from OdGeCurve3d)
intersectWith(const OdGeLinearEnt3d&, OdGePoint3d&, const OdGeTol&)
This is the overview for the intersectWith method overload.
isClosed
Returns true if and only if this curve is closed within the specified tolerance.
(Inherited from OdGeCurve3d)
isColinearTo
Returns true if and only if the specified line is collinear with this one.
(Inherited from OdGeLinearEnt3d)
isCoplanarWith
Returns true if the specified curve entity is coplanar with this curve and returns the common plane.
(Inherited from OdGeCurve3d)
isDegenerate(OdGe::EntityId&, const OdGeTol&)
This is the overview for the isDegenerate method overload.
isEqualTo
Checks whether the specified entity is equal to this one.
(Inherited from OdGeEntity3d)
isKindOf
Returns true if and only if this entity is of type (or is derived from) entType.
(Inherited from OdGeEntity3d)
isLinear
Returns true, and a linear entity coincident with this curve, if and only if this curve is linear.
(Inherited from OdGeCurve3d)
isOn
Returns true if and only if the specified point is on this entity, as determined by the tolerance.
(Inherited from OdGeEntity3d)
isOn
Determines if this line lies on the specified plane considering the tolerance.
(Inherited from OdGeLinearEnt3d)
isOn(const OdGePoint3d&, double&, const OdGeTol&)
This is the overview for the isOn method overload.
isParallelTo(const OdGeLinearEnt3d&, const OdGeTol&)
This is the overview for the isParallelTo method overload.
isPeriodic
Returns true if and only if this curve is periodic for the specified period.
(Inherited from OdGeCurve3d)
isPerpendicularTo(const OdGeLinearEnt3d&, const OdGeTol&)
This is the overview for the isPerpendicularTo method overload.
isPlanar
Returns true if and only if this curve is planar, and returns the plane of this curve.
(Inherited from OdGeCurve3d)
joinWith
Attaches to the end of itself another curve.
length(double)
This is the overview for the length method overload.
midPoint
Calculates a point from the curve interval that corresponds to the specified coefficient.
(Inherited from OdGeCurve3d)
mirror
Mirrors this entity about the specified plane, and returns a reference to this entity.
(Inherited from OdGeEntity3d)
orthoBoundBlock()
This is the overview for the orthoBoundBlock method overload.
orthoProject
Returns the entity that is the orthogonal projection of the curve onto the projection plane. (Inherited from OdGeCurve3d)
overlap
Determines if two lines overlap and if so returns the line that coincides with their region of overlap.
(Inherited from OdGeLinearEnt3d)
paramAtLength
Returns the parameter of the point at a specified distance from the starting point corresponding to datumParam.
(Inherited from OdGeCurve3d)
paramOf(const OdGePoint3d&, const OdGeInterval*, const OdGeTol&)
This is the overview for the paramOf method overload.
pointOnLine
Returns an arbitrary point on this line. (Inherited from OdGeLinearEnt3d)
projClosestPointTo(const OdGeCurve3d&, const OdGeVector3d&, OdGePoint3d&, const OdGeTol&)
This is the overview for the projClosestPointTo method overload.
projIntersectWith
Returns the projected intersection of the specified line with this line.
(Inherited from OdGeLinearEnt3d)
project
Returns the entity that is the projection of the curve onto the projection plane in the specified direction. (Inherited from OdGeCurve3d)
reverseParam
Reverses the parameter direction this curve.
(Inherited from OdGeCurve3d)
rotateBy
Rotates this entity by the specified angle about the axis defined by the point and the vector, and returns a reference to this entity.
(Inherited from OdGeEntity3d)
scaleBy
Scales this entity by the scale factor about the basepoint, and returns a reference to this entity.
(Inherited from OdGeEntity3d)
set(const OdGeCurve3d&, const OdGeCurve3d&, double&, double&, bool&)
This is the overview for the set method overload.
setInterval()
This is the overview for the setInterval method overload.
startPoint
Returns the start point of this line segment.
transformBy
Applies the 3D transformation matrix to this entity, and returns a reference to this entity.
(Inherited from OdGeEntity3d)
translateBy
Applies the 3D translation vector to this entity, and returns a reference to this entity.
(Inherited from OdGeEntity3d)
type
Returns the entity type. (Inherited from OdGeEntity3d)
Show:
No members matching the current filter
!=
Comparison operator for the OdGeEntity3d object.
(Inherited from OdGeEntity3d)
=
The assignment operator for objects the OdGeCurve3d class. (Inherited from OdGeCurve3d)
=
Assignment operator for the OdGeEntity3d object.
(Inherited from OdGeEntity3d)
=
Assignment operator for the OdGeLineSeg3d object.
=
Assignment operator for the OdGeLinearEnt3d object.
(Inherited from OdGeLinearEnt3d)
==
Comparison operator for the OdGeEntity3d object.
(Inherited from OdGeEntity3d)
Send feedback about this topic
Copyright © 2002-2022. Open Design Alliance All rights reserved.