Close

Relief for ODA Team in Ukraine

Learn more
ODA IFC SDK
IfcStairFlight Class
Syntax
C++
class IfcStairFlight : public IfcBuildingElement;

A stair flight is an assembly of building components in a single "run" of stair steps (not interrupted by a landing). The stair steps and any stringers are included in the stair flight. A winder is also regarded a part of a stair flight. 

An IfcStairFlight is normally aggregated by an IfcStair through the IfcRelAggregates relationship, the stair flight is then included in the set of IfcRelAggregates.RelatedObjects. An IfcStairFlight normally connects the floor slab of zero to two different storeys (or partial storeys, or landings) within a building. The connection relationship between the IfcStairFlight and the IfcSlab can be expressed using the IfcRelConnectsElements relationship. 

 

Axis 2D Geometry

The walking line is represented by a two-dimensional open curve as the axis. The curve is directed into the upward direction (direction has to be interpreted as specified at the subtypes of IfcCurve). The image below illustrates the axis representation which has the following constraints:

  • In case of straight flights the curve is a single item of type IfcPolyline
  • In case of winding flights the curve is a single item of type IfcCompositeCurve
  • In case of a curved flight or a spiral flight the curve is a single item of type IfcTrimmedCurve

 

 

Body SweptSolid Geometry

The image below illustrates the 'Body' geometric representation using a 'SweptSolid' representation type. 

 

 

FootPrint Geometry

The flight foot print, including the flight boundary is represented by a two-dimensional geometric curve set. The image below illustrates the footprint representation which has the following constraints:

  • In case of straight flights the curve set consists of a single item of type IfcPolyline
  • In case of winding flights or curved flights the curve set consists of a single item of type IfcCompositeCurve
  • In case of a spiral flight the curve set consists of a single item of type IfcConic or IfcPolyline

 

 

changes 

 

  • IFC4 changes:
    • Name of the NumberOfRiser attribute changed to NumberOfRisers
    • Type of the NumberOfRiser attribute changed from "integer" to "IfcInteger"
    • Type of the NumberOfTreads attribute changed from "integer" to "IfcInteger"
OdIfc4__IfcStairFlightOdIfc4__IfcStairFlightOdIfc4__IfcStairFlightOdIfc4__IfcStairFlightOdIfc4__IfcStairFlightOdIfc4__IfcStairFlightOdIfc4__IfcStairFlightOdIfc4__IfcStairFlightOdIfc4__IfcStairFlightOdIfc4__IfcStairFlightOdIfc4__IfcStairFlight

File: IfcStairFlightAutoImpl.h 

Namespace: OdIfc4 

Show:
No members matching the current filter
Show:
No members matching the current filter
Copyright © 2002-2022. Open Design Alliance All rights reserved.