This document provides a list of commands available in the ODA Drawings Debug application for 3D modeling functionality.
| Command Group/Command Name | Module | Description |
|---|---|---|
| SubDMesh/ConvToMesh | ExCommands |
Converts the given object to a mesh (an OdDbSubDMesh object). The object should be one of these types: OdDbPolyline, OdDb3dSolid, OdDbSurface, OdDbRegion. Supports colors and materials.
|
| MeshToSolid | ExCommands |
Converts DbSubDMesh to Db3dSolid with different parameters(smoothed/not smoothed, optimized/not optimized).
|
| MeshToSurface | ExCommands |
Converts DbSubDMesh to DbSurface with different parameters(smoothed\not smoothed, optimized\not optimized).
|
| MeshRayIntersect | ExCommands |
Demonstrates working with the OdDbSubDMesh::computeRayIntersection() method.
|
| DrxDebug/addSection | ExCustObjs |
Creates an OdDbSection entity.
|
| DrxDebug/toggleLiveSection | ExCustObjs |
Switches OdDbSection live section state.
|
| MODELER GEOMETRY/CreateSurface | ExCommands |
Creates a surface from the given object. The object should be one of these types: OdDbDbCircle, OdDbEllipse, OdDb3dPolyline, OdDb2dPolyline, OdDbPolyline, OdDbSpline, OdDb3dSolid, OdDbSolid.
|
| Spline/ToPolyline | ExCommands | Converts a spline to a polyline. |
| Draw/Extrude | ExCommands |
Creates an extruded solid or surface from the given entity by the specified direction vector or height and taper angle. The command uses the AlignOption::kTranslatePathToSweepEntity option which means that the solid is created at the position of the original (source) entity. Implemented in SpaModeler and ModelerGeometry modelers.
|
| Explode/explodeGeometry | ExCustObjs | Explodes geometry. |
| Explode/explodeGeometryToBlock | ExCustObjs | Explodes geometry to a block table. |
| Explode/explode_test | ExCustObjs | Same as explodeGeometry. |
| Explode/explodeToBlock | ExCustObjs | Same as explodeGeometryToBlock. |
| 3D create/CreateBreps | ExCustObjs | Creates different entities using ACIS B-Rep Builder. |
| Sat tests/CreateRegionsFromCurves | ExCustObjs | Creates regions from curves. |
| Sat tests/ExtrudeRegionsFromCurves | ExCustObjs | Creates regions from curves and extrudes them by heights 5 and -5. |
| Sat tests/ExtrudeRegionsFromModelSpace | ExCustObjs | Gets all regions from model space and extrudes them by heights 5 and -5. |
| Sat tests/ExtrudeSolid | ExCustObjs | Extrudes solid faces. Currently not implemented. |
| Sat tests/RevolveRegionsFromModelSpace | ExCustObjs | Creates solids by revolving all regions from model space using the revolve axis (OdGePoint3d::kOrigin, OdGeVector3d::kYAxis). |
| Sat tests/CheckInterference | ExCustObjs | Checks whether a solid interferes with another. Implemented for SpaModeler only. |
| Sat tests/getMassProp | ExCustObjs | Computes volume, centroid, moment of inertia, radius of gyration, principle axis and other physical quantities. Implemented for SpaModeler only. |
| Sat tests/getAreaProp | ExCustObjs | Computes area of regions, centroid, moment of inertia, radius of gyration, principle axis and other physical quantities. Implemented for SpaModeler only. |
| Sat tests/GetSection | ExCustObjs | Creates a section of the solid perpendicular to the direction of the view. Implemented for SpaModeler only. |
| Sat tests/GetSlice | ExCustObjs | Slices a solid or surface by a plane created by the specified point and normal. |
| Sat tests/GetSliceSurf | ExCustObjs | Slices a solid or surface by a given surface. |
| Sat tests/thicken | ExCustObjs | Creates a 3D solid object by thickening the selected surface by a specified amount. Currently not implemented. |
| Sat tests/convertToRegion | ExCustObjs | Creates a region entity (an OdDbRegion object) for each face of the surface. |
| Sat tests/createFromCurves | ExCustObjs | Creates regions from curves. |
| Sat tests/SeparateBody | ExCustObjs | Splits a solid into an array of solids representing the additional disjoint volumes. Implemented for SpaModeler only. |
| Surface solid tests/Sweep | ExCustObjs | Creates a swept solid by sweeping the selected entity along the specified path. Completely implemented for SpaModeler. Implementation for ModelGeometry has restrictions. |
| Surface solid tests/Revolve | ExCustObjs | Creates a solid by revolving the specified curve, region, or planar surface around the specified axis of revolution. Implemented for SpaModeler only. |
| Surface solid tests/CreateLoftedSolid | ExCustObjs | Creates a lofted solid from the given curves. There are three modes: with only cross section curves, with path curve or with guide curves. Implemented for SpaModeler only. |
| Surface solid tests/CreateLoftSurface | ExCustObjs | Creates a surface from the selected guide curves. Implemented for SpaModeler only. |
| Surface solid tests/intersectWith | ExCustObjs | Intersects the selected region with an entity curve. |
| Surface solid tests/CreateNurbSurface | ExCustObjs | Creates a NURBS surface using pre-defined data. |
| Surface solid tests/BooleanPETest | ExCustObjs | Creates a region with the B-Rep Builder, performs a Boolean subtract operation and extrudes the resulting regions as input data for creation of a solid by extrusion. After that, performs another Boolean operation (subtract) with this solid and the created one. |
| Surface solid tests/CopySubent | ExCustObjs | Simply copies edges and faces of the selected solid. |
| Subentity tests/ExtrudeFaces | ExCustObjs | Extrudes faces of the selected solid. Additional parameters are: height and taper. Currently not implemented. |
| Subentity tests/NumChanges | ExCustObjs | Returns the number of changes that occurred since the solid's creation. Currently not implemented. |
| Subentity tests/TransformFaces | ExCustObjs | Transforms faces of a solid by applying a transformation matrix. Currently not implemented. |
| Subentity tests/ShellBody | ExCustObjs | Transforms a solid into a thin-walled solid shell by offsetting faces. Distance entered as an input parameter. Currently not implemented. |
| Subentity tests/TaperFaces | ExCustObjs | Tapers faces about the specified base point and about the draft vector for a specified draft angle. Currently not implemented. |
| Subentity tests/SetSubentColor | ExCustObjs | Sets the specified color of the subentities of a selected OdDb3dSolid. |
| Subentity tests/SetSubentMaterial | ExCustObjs | Sets a material (TestMaterial) for the subentities of a selected OdDb3dSolid. Currently not implemented. |
| Subentity tests/ChamferEdges | ExCustObjs | Creates chamfers at the edges of a selected solid or a surface. Currently not implemented. |
| MODELER GEOMETRY/SpaAuditBREP | ModelerCommands | Checks entities using SpaModeler. Two modes can be used: invalid entities are colored red and valid are colored green, or invalid entities are removed. The command can process all entities in the database, only the entities in model space, or only selected entities. |
| MODELER GEOMETRY/auditBREP | ModelerCommands | Checks selected entities (OdDbSurface, OdDbRegion, OdDb3dSolid or OdDbBody) using the ACIS B-Rep Builder validator. Two modes can be used: invalid entities are colored red and valid are colored green, or invalid entities are removed. The command can process all entities in the database, only the entities in model space, or only selected entities. |
| MODELER GEOMETRY/sweep_ex | ModelerCommands | Interactive analogue of the Sweep command (see Surface solid tests/Sweep). |
| MODELER GEOMETRY/EnableNewTessellation | ModelerCommands | Switches between two tessellation modes in the ModelerGeometry modeler. |
| MODELER GEOMETRY/copyBREP | ModelerCommands | Copies the selected entity (OdDbSurface, OdDbRegion, OdDb3dSolid or OdDbBody) using ACIS B-Rep Builder. Input data can be optionally verified by B-Rep Builder. |
| MODELER GEOMETRY/Union | ModelerCommands | Executes the Boolean union operation on selected entities (OdDb3dSolid, OdDbSurface or OdDbRegion). |
| MODELER GEOMETRY/Subtract | ModelerCommands | Executes the Boolean subtract operation on selected entities (OdDb3dSolid or OdDbRegion). You can also apply this operation to two groups of entities. In this case, the entities in each group are united. |
| MODELER GEOMETRY/Intersect | ModelerCommands | Intersects the selected entity with other selected one. Entities can be OdDb3dSolid or OdDbRegion. |
| MODELER GEOMETRY/IntersectSurf | ModelerCommands | Intersects the selected surface with other selected one. Surfaces can be OdDb3dSolid, OdDb3dSolid, OdDbRegion or OdDbBody). |
| MODELER GEOMETRY/UnionEx | ModelerCommands | Interactively unites the selected objects. |
| MODELER GEOMETRY/SubtractEx | ModelerCommands | Interactively subtracts the selected objects. |
| MODELER GEOMETRY/IntersectEx | ModelerCommands | Interactively intersects the selected objects. |
| MODELER GEOMETRY/Sculpt | ModelerCommands | Creates a waterproof OdDb3dSolid from selected objects. Entities can be OdDb3dSolid, OdDbSurface, OdDbRegion, OdDbBody or OdDbSubDMesh. |
| MODELER GEOMETRY/Imprint | ModelerCommands | Intersects the given entity with a solid or surface and imprints their intersection graph onto it. |
| MODELER GEOMETRY/solidedit | ModelerCommands | Performs the Separate, OffsetBody or CleanBody command on the selected solid. The Separate command separates the solid into an array of solids representing the additional disjoint volumes. This solid is reduced to a solid with one volume. The OffsetBody command creates parallel copies of all faces by the specified distance. The CleanBody command removes all edges and faces that are not needed for supporting the topology of the solid. Implemented for SpaModeler only. |
| MODELER GEOMETRY/region | ModelerCommands | Creates a region from curves. |
| MODELER GEOMETRY/LineContainment | ModelerCommands | Finds the intersection of a solid and a line. Implemented for SpaModeler only. |
| MODELER GEOMETRY/SurfaceLineContainment | ModelerCommands | Finds the intersection of a surface and a line. Implemented for SpaModeler only. |
|
Copyright © 2002 – 2022. Open Design Alliance. All rights reserved.
|